LIVE-BOOT(7) Debian Live Project LIVE-BOOT(7)
NAME
live-boot - System Boot ScriptsDESCRIPTION
live-boot contains the scripts that configure a Debian Live system dur‐ ing the boot process (early userspace). live-boot is a hook for the initramfs-tools, used to generate a initramfs capable to boot live systems, such as those created by live-helper(7). This includes the Debian Live isos, netboot tarballs, and usb stick images. At boot time it will look for a (read-only) media containing a "/live" directory where a root filesystems (often a compressed filesystem image like squashfs) is stored. If found, it will create a writable environ‐ ment, using aufs, for Debian like systems to boot from.CONFIGURATION
live-boot can be configured through a boot parameter or a configuration file. To configure the live-boot parameters used by default in a live image, see the --bootappend-live option in the lb_config(1) manual page.Kernel Parameters
live-boot is only activated if 'boot=live' was used as a kernel parame‐ ter. In addition, there are some more boot parameters to influence the be‐ haviour, see below.Configuration Files
live-boot can be configured (but not activated) through configuration files. Those files can be placed either in the root filesystem itself (/etc/live/boot.conf, /etc/live/boot/*), or on the live media (live/boot.conf, live/boot/*).OPTIONS
live-boot currently features the following parameters. access=ACCESS Set the accessibility level for physically or visually impaired users. ACCESS must be one of v1, v2, v3, m1, or m2. v1=lesser vis‐ ual impairment, v2=moderate visual impairment, v3=blindness, m1=minor motor difficulties, m2=moderate motor difficulties. console=TTY,SPEED Set the default console to be used with the "live-getty" option. Example: "console=ttyS0,115200" debug Makes initramfs boot process more verbose. Use: debug=1 Without setting debug to a value the messages may not be shown. fetch=URL httpfs=URL Another form of netboot by downloading a squashfs image from a given url. The fetch method copies the image to ram and the httpfs method uses fuse and httpfs2 to mount the image in place. Copying to ram requires more memory and might take a long time for large images. However, it is more likely to work correctly because it does not require networking afterwards and the system operates faster once booted because it does not require to contact the server anymore. Due to current limitations in busybox's wget and DNS resolution, an URL can not contain a hostname but an IP only. Not working: http://example.com/path/to/your_filesystem.squashfs Working: http://1.2.3.4/path/to/your_filesystem.squashfs Also note that therefore it's currently not possible to fetch an image from a namebased virtualhost of an httpd if it is sharing the ip with the main httpd instance. You may also use the live iso image in place of the squashfs image. iscsi=server-ip[,server-port];target-name Boot from an iSCSI target that has an iso or disk live image as one of its LUNs. The specified target is searched for a LUN which looks like a live media. If you use the iscsitarget software iSCSI target solution which is packaged in Debian your ietd.conf might look like this: # The target-name you specify in the iscsi= parameter Target <target-name> Lun 0 Path=<path-to-your-live-image.iso>,Type=fileio,IOMode=ro # If you want to boot multiple machines you might want to look at tuning some parameters like # Wthreads or MaxConnections findiso=/PATH/TO/IMAGE Look for the specified ISO file on all disks where it usually looks for the .squashfs file (so you don't have to know the device name as in fromiso=....). fromiso=/PATH/TO/IMAGE Allows to use a filesystem from within an iso image that's avail‐ able on live-media. ignore_uuid Do not check that any UUID embedded in the initramfs matches the discovered medium. live-boot may be told to generate a UUID by set‐ ting LIVE_GENERATE_UUID=1 when building the initramfs. verify-checksums If specified, an MD5 sum is calculated on the live media during boot and compared to the value found in md5sum.txt found in the root directory of the live media. ip=[DEVICE]:[CLIENT_IP]:[NETMASK]:[GATEWAY_IP]:[NAMESERVER] [,[DEVICE]:[CLIENT_IP]:[NETMASK]:[GATEWAY_IP]:[NAMESERVER]] Let you specify the name(s) and the options of the interface(s) that should be configured at boot time. Do not specify this if you want to use dhcp (default). It will be changed in a future release to mimick official kernel boot param specification (e.g. ip=10.0.0.1::10.0.0.254:255.255.255.0::eth0,:::::eth1:dhcp). ip=[frommedia] If this variable is set, dhcp and static configuration are just skipped and the system will use the (must be) media-preconfigured /etc/network/interfaces instead. {live-media|bootfrom}=DEVICE If you specify one of this two equivalent forms, live-boot will first try to find this device for the "/live" directory where the read-only root filesystem should reside. If it did not find some‐ thing usable, the normal scan for block devices is performed. Instead of specifing an actual device name, the keyword 'removable' can be used to limit the search of acceptable live media to remov‐ able type only. Note that if you want to further restrict the media to usb mass storage only, you can use the 'removable-usb' keyword. {live-media-encryption|encryption}=TYPE live-boot will mount the encrypted rootfs TYPE, asking the passphrase, useful to build paranoid live systems :-). TYPE sup‐ ported so far are "aes" for loop-aes encryption type. live-media-offset=BYTES This way you could tell live-boot that your image starts at offset BYTES in the above specified or autodiscovered device, this could be useful to hide the Debian Live iso or image inside another iso or image, to create "clean" images. live-media-path=PATH Sets the path to the live filesystem on the medium. By default, it is set to '/live' and you should not change that unless you have customized your media accordingly. live-media-timeout=SECONDS Set the timeout in seconds for the device specified by "live-media=" to become ready before giving up. module=NAME Instead of using the default optional file "filesystem.module" (see below) another file could be specified without the extension ".mod‐ ule"; it should be placed on "/live" directory of the live medium. netboot[=nfs|cifs] This tells live-boot to perform a network mount. The parameter "nfsroot=" (with optional "nfsopts="), should specify where is the location of the root filesystem. With no args, will try cifs first, and if it fails nfs. nfsopts= This lets you specify custom nfs options. nofastboot This parameter disables the default disabling of filesystem checks in /etc/fstab. If you have static filesystems on your harddisk and you want them to be checked at boot time, use this parameter, oth‐ erwise they are skipped. nopersistence disables the "persistence" feature, useful if the bootloader (like syslinux) has been installed with persistence enabled. noeject Do not prompt to eject the live medium. ramdisk-size This parameters allows to set a custom ramdisk size (it's the '-o size' option of tmpfs mount). By default, there is no ramdisk size set, so the default of mount applies (currently 50% of available RAM). Note that this option has no currently no effect when booting with toram. swapon This parameter enables usage of local swap partitions. persistence live-boot will probe devices for persistence media. These can be partitions (with the correct GPT name), filesystems (with the cor‐ rect label) or image files (with the correct file name). Overlays are labeled/named "persistence" (see persistence.conf(5)). Overlay image files have extensions which determines their filesystem, e.g. "persistence.ext4". persistence-encryption=TYPE1,TYPE2 ... TYPEn This option determines which types of encryption that we allow to be used when probing devices for persistence media. If "none" is in the list, we allow unencrypted media; if "luks" is in the list, we allow LUKS-encrypted media. Whenever a device containing encrypted media is probed the user will be prompted for the passphrase. The default value is "none". persistence-media={removable|removable-usb} If you specify the keyword 'removable', live-boot will try to find persistence partitions on removable media only. Note that if you want to further restrict the media to usb mass storage only, you can use the 'removable-usb' keyword. persistence-method=TYPE1,TYPE2 ... TYPEn This option determines which types of persistence media we allow. If "overlay" is in the list, we consider overlays (i.e. "live-rw" and "home-rw"). The default is "overlay". persistence-path=PATH live-boot will look for persistency files in the root directory of a partition, with this parameter, the path can be configured so that you can have multiple directories on the same partition to store persistency files. persistence-read-only Filesystem changes are not saved back to persistence media. In par‐ ticular, overlays and netboot NFS mounts are mounted read-only. persistence-storage=TYPE1,TYPE2 ... TYPEn This option determines which types of persistence storage to con‐ sider when probing for persistence media. If "filesystem" is in the list, filesystems with matching labels will be used; if "file" is in the list, all filesystems will be probed for archives and image files with matching filenames. The default is "file,filesystem". persistence-label=LABEL live-boot will use the name "LABEL" instead of "persistence" when searching for persistent storage. LABEL can be any valid filename, partition label, or GPT name. This option replaces the less flexi‐ ble persistent-subtext option from version 2 of live-boot. If you wish to continue using legacy names for persistent storage, use the full name with this option, e.g. persistence-label=live-rw-foo quickreboot This option causes live-boot to reboot without attempting to eject the media and without asking the user to remove the boot media. showmounts This parameter will make live-boot to show on "/" the ro filesys‐ tems (mostly compressed) on "/lib/live". This is not enabled by default because could lead to problems by applications like "mono" which store binary paths on installation. silent If you boot with the normal quiet parameter, live-boot hides most messages of its own. When adding silent, it hides all. todisk=DEVICE Adding this parameter, live-boot will try to copy the entire read-only media to the specified device before mounting the root filesystem. It probably needs a lot of free space. Subsequent boots should then skip this step and just specify the "live-media=DEVICE" boot parameter with the same DEVICE used this time. toram Adding this parameter, live-boot will try to copy the whole read-only media to the computer's RAM before mounting the root filesystem. This could need a lot of ram, according to the space used by the read-only media. union=aufs|unionfs By default, live-boot uses aufs. With this parameter, you can switch to unionfs.FILES (old)
/etc/live.conf Some variables can be configured via this config file (inside the live system). live/filesystem.module This optional file (inside the live media) contains a list of white-space or carriage-return-separated file names corresponding to disk images in the "/live" directory. If this file exists, only images listed here will be merged into the root aufs, and they will be loaded in the order listed here. The first entry in this file will be the "lowest" point in the aufs, and the last file in this list will be on the "top" of the aufs, directly below /overlay. Without this file, any images in the "/live" directory are loaded in alphanumeric order.FILES
/etc/live/boot.conf /etc/live/boot/* live/boot.conf live/boot/* persistence.confSEE ALSO
persistence.conf(5) live-build(7) live-config(7) live-tools(7)HOMEPAGE
More information about live-boot and the Debian Live project can be found on the homepage at <http://live.debian.net/> and in the manual at <http://live.debian.net/manual/>.BUGS
Bugs can be reported by submitting a bugreport for the live-boot pack‐ age in the Debian Bug Tracking System at <http://bugs.debian.org/> or by writing a mail to the Debian Live mailing list at <debian- live@lists.debian.org>.AUTHOR
live-boot was written by Daniel Baumann <daniel@debian.org> for the Debian project.3.0.1-1 2013-02-14 LIVE-BOOT(7)