Clonezilla

The Free and Open Source Software for Disk Imaging and Cloning
Clonezilla Live Doc
Print all this session
Add extra driver : How to put your own binary driver in Clonezilla live without modifying /live/filesystem.squashfs
  1. How to put your own binary driver in Clonezilla live without modifying /live/filesystem.squashfs
How to put your own binary driver in Clonezilla live without modifying /live/filesystem.squashfs
  • Boot clonezilla live
  • Become root by running "sudo su -"
  • Copy the dir lsi, which contains a precompiled kernel module matching the running kernel in Clonezilla live and a script to run it, to a working dir, e.g.:
    cp -r /live/image/lsi /home/partimag
  • cd /home/partimag
  • ocs-live-dev -c -s -i lsi -u lsi -x "ocs_prerun=/live/image/lsi/prep-lsi.sh"
  • ocs-iso -s -i lsi -u lsi -x "ocs_prerun=/live/image/lsi/prep-lsi.sh"
  • ///NOTE/// In this example, the 2 files in dir lsi are: megasr.ko (the binary driver) and prep-lsi.sh. The contents of prep-lsi.sh:
    ------------------------
    #!/bin/bash
    cp -f /live/image/lsi/megasr.ko /lib/modules/`uname -r`/kernel/drivers/block/
    chown root.root /lib/modules/`uname -r`/kernel/drivers/block/megasr.ko
    depmod -a modprobe megasr
    sleep 1
    ------------------------
    

    For more boot parameters, please refer to this doc.

    Print this page
Clonezilla project. All Rights Reserved. Anyone is permitted to copy and distribute verbatim copies of this document under the terms of the GNU FDL Free Documentation License.